Welcome to the official website of micron air purification Co., ltd.!
Dongguan micron air purification Co., Ltd.
  • Dongguan micron air purification Co., Ltd.
  • Dongguan micron air purification Co., Ltd.
  • Dongguan micron air purification Co., Ltd.
  • Dongguan micron air purification Co., Ltd.
  • Dongguan micron air purification Co., Ltd.
Now:Home -> Products -> Return

High temperature high efficiency filter

Information
Name: High temperature high efficiency filter
Category: High temperature high efficiency filter
keyword:
Views:
Time: 2016-02-29 15:00:16
Purchase
Detail

参数:


 

产品说明:
耐高温高效过滤器使用隔板式设计,波纹形隔板可以精确地保持褶层间距,在最小阻力下,最大限度地利用滤料。过滤器滤材两面180褶翻折形成锲形褶层,滤料折弯时有两道压痕,使其在隔板的尾端开成锲形盒式褶层,锲形盒式褶层可以有效防止滤料破损。

不锈钢外框。
密封胶:耐高温型硅胶。
密封垫:玻璃纤维,硅橡胶.
连续运行最高耐温:300℃--450℃
性能特点:
1、有H10~H14各种效率规格适应不同的要求
2、不锈钢外框配以特种耐温密封材料,耐温300℃
3、专用折叠设备进行折叠
4、特制玻璃纤维滤纸作为滤材
5、特种铝箔间隔片
6、每台过滤器都经过抗挥发处理,并严格检测。
应 用:
耐高温过滤器主要用于超净烘箱、超净清洗机、化工行业等要求高温空气净化的设备及系统
因耐高温高效过滤器所使用的有机硅胶及无机胶固化过程中,是从表面往里固化,注胶高度越厚,越难固化,正常情况下胶水固化时间为3-7天,如果未完全固化的高温高效过滤器直接装入到高温设备上正常使用,势必会造成高温胶开裂、膨胀及胶水脱离外框等现象;
针对以上问题,特做如下两点方案进行处理:
1、高温高效过滤器需待7天后正常使用;
2、如客户需马上安装,建议客户在使用我司耐高温高效过滤器之前务必按以下方法操作:
耐250℃耐高温高效过滤器 在高温设备内缓慢升温至100℃,然后恒温2小时后停机冷却;
调温至150℃ 1小时后停机冷却
调温至200℃ 1小时后停机冷却
调温至300℃ 1小时后停机冷却
最后缓慢冷却后,即可正常使用。
* Denotes required Purchase:High temperature high efficiency filter
* Contacts: Please fill in your real name
Company: Please enter your company name
Telephone:
* Phone: Please enter your phone number
Email:
Address:
* Description intent to purchase:
Please fill outPurchaseThe number of products。

Dongguan micron air purification Limited
Phone: 400-8898-272 Fax: 0769-2662-7686
Complaint Phone: 13412585808
Address: Dongcheng District housing more than industrial zone Dongguan City, Guangdong Wan Long Road 37
* This website is copyright of the Dongguan-micron air purification Ltd. All *

  Record: Guangdong ICP No. 14046662-1